Photo-stabilising action of metal chelate stabilisers in polypropylene: Part VII—Additive interactions

The interactions of three metal chelates (nickel (II) 2,2′-thiobis (4-tertoctyl-phenolato), n-butylamine (Cyasorb UV 1084) and the nickel and calcium derivatives of bis(ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate (Irgastab 2002 and Irganox 1425)) with other commercial additives, in the stabilisation of polypropylene film, are examined using normal and second-order derivative ultraviolet and infra-red spectroscopic techniques. It is shown that the observed behaviour is dependent on the particular additive, the processing history of the polymer and the metal chelate concerned, and is therefore highly complex. All three chelates show antagonism with a hindered piperidine, bis(2,2,6,6-tetramethyl-4-piperidinyl) sebacate (Tinuvin 770), in unprocessed polymer, whereas one of the chelates behaves synergistically with this additive in processed samples. The chelates also show antagonism with a primary antioxidant, tris((3-(3′,5′-di-tert-butyl-4-hydroxybenzyl)-2′'-aceto-ethyl)) isocyanurate (Goodrite 3125), whereas, with a secondary antioxidant, distearyl pent-aerithrityl diphosphite (Weston 618), their behaviour is synergistic in both unprocessed and processed polymer. Two of the chelates show synergism with 2-hydroxy-4-n-octoxybenzophenone (Cyasorb UV 531), the remaining chelate showing antagonism. Mixtures containing a three-additive system show a more complex behaviour. The results are explained in terms of hydroperoxide decomposition, inhibition, stabiliser dispersion, ultraviolet stability and additive compatibility.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Synthesis and pharmacological evaluation of new 16-methyl pregnane derivatives

The pharmacological activity of several new pregnane derivatives 15-19 were determined on gonadectomized male hamster flank organs, seminal vesicles and in vitro conversion of testosterone (T) to dihydrotestosterone (DHT) as 5alpha-reductase inhibitors. Steroids 15-19 decreased the diameter of the pigmented spot in the flank organs as compared to the T treated animals; in this model, steroids 16 and 19 showed a higher activity than the commercially available finasteride 3. Injection of T increased the weight of the seminal vesicles. Compounds 15-19 when injected together with T decreased the weight of the seminal vesicles thus showing an antiandrogenic effect. The trienone 19 exhibited a considerably higher activity than finasteride. Steroids 15-19 inhibited the in vitro metabolism of [3H]T to [3H]DHT in seminal vesicles homogenates of gonadectomized male hamsters. Compounds 18 and 19 showed a much higher antiandrogenic effect than finasteride. This enhancement of the biological activity could probably be attributed to the coplanarity of the steroidal skeleton as previously observed by our group. The high antiandrogenic activity of the epoxy compound 16 is probably the result of the ring opening of the oxiran ring with the nucleophilic part of the enzyme 5alpha-reductase thus leading to a stable adduct with concomitant deactivation of this enzyme.     

New versatile route to the synthesis of tetrahydro-beta-carbolines and tetrahydro-pyrano[3,4-b]indoles via an intramolecular Michael addition catalyzed by InBr3

A simple multistep synthetic strategy to 4-substituted 1,2,3,4-tetrahydro-beta-carboline and 1,3,4,9-tetrahydro-pyrano[3,4-b]indole derivatives starting from commercially available indole 2-carboxylic acid (5) is described. The final intramolecular Michael addition promoted by catalytic amount of InBr(3) (5-10 mol %) provided the expected polycyclic compounds in excellent yields (up to 97%) both in anhydrous organic and aqueous media.     

Effects of concentrated matrices on the determination of trace levels of platinum and gold in aqueous samples using solvent extraction—Zeeman effect graphite furnace atomic absorption spectrometry and inductively coupled plasma—mass spectrometry

Two methods of determining trace levels of platinum and gold in aqueous solutions with high concents of total dissolved solids were investigated. The first involves preconcentration and separation of the precious metals from the interfering matrix by solvent extraction, followed by graphite furnace atomic absorption spectrometry (GFAAS) with Zeeman effect background correction. The direct determination of Pt and Au in solutions of high ionic strength by GFAAS is not desirable because of interference between elements in the matrix and the analyte, increased imprecision of analysis, greatly increased background absorbance leading to increased detection limits and rapid deterioration of the graphite tube. All the extraction methods for gold examined in this study resulted in decreased imprecision, increased sensitivity and lower background absorbance compared with direct measurements on the aqueous solution. All techniques also exhibited good recoveries (> 8%) and reproducibilities (relative standard deviation < 10%). The highest sensitivities for gold extraction from distilled water were obtained for dibutyl sulfide (DBS)—toluene and the lowest for cyanide—dibutyl ketone. The degree of extraction of Au was, however, dependent on the composition of the solution, indicating that standard and sample matrices should be closely matched even when employing solvent extraction. Solvent extraction was generally less successful for Pt. In order to obtain an acceptable imprecision in the Pt extractions, it was found that the use of SnCl₂ as a labilizing agent is essential for most of the techniques investigated.The second method was direct measurement by inductively coupled plasma mass spectrometry (ICP—MS). ICP—MS offers the advantages of a very low detection limit (100 ng l^?1 or better) without preconcentration and a large dynamic range. However, severe matrix effects can occur in concentrated solutions. Whereas high concentrations in solution of both sodium perchlorate and sodium chloride decrease the sensitivity, the presence of sulfide and natural organic (fulvic) acid increase the sensitivity for Pt and Au by a factor of up to 4. Sulfate, on the other hand, decreases the sensitivity of ICP-MS for Pt. The method of standard additions or isotope dilution is recommended for routine use to circumvent this problem, especially when the nature of the matrix is unknown or cannot be easily matched in the standards.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

Electrospray Ionization Mass Spectrometry (ESI-MS) as a Useful Tool for Fast Evaluation of Anion and Cation Complexation Abilities of a Cyclam Derivative

Electrospray ionization mass espectrometry (ESI-MS) has been used for the study of a cyclam derivative noncovalent interactions. At acidic pH, diprotonated macrocycle bound to different anionic species were observed. The selectivity shown by competitive experiments is rationalized with the help of semiempirical theoretical calculations. At basic pH, the base peak corresponded to the macrocycle-alkaline metal complexes, and again competition experiments showed different binding strength. Finally, experiments carried out in the presence of transition metal salts allowed the detection of the complexes present in the mixture and revealed their different kinetic behavior.     

Biocatalytic approaches toward the synthesis of both enantiomers of trans-cyclopentane-1,2-diamine

[reaction: see text] A lipase-catalyzed double monoaminolysis of dimethyl malonate by (+/-)-trans-cyclopentane-1,2-diamine allows the sequential resolution of the latter compound, affording an enantiopure bis(amidoester), which is subsequently transformed into an optically active polyamine. As an alternative, both enantiomers of the diamine can be obtained from enantiopure (+)- or (-)-2-aminocyclopentanol, prepared by enzymatic resolution.     

Total synthesis of (+)-aspidospermidine: a new strategy for the enantiospecific synthesis of aspidosperma alkaloids

A new strategy was developed for the enantiospecific synthesis of aspidosperma alkaloids. The key steps involve a novel ketene-lactonization reaction of a chiral vinyl sulfoxide to efficiently set up the quaternary carbon center, and a tandem Michael addition-alkylation reaction sequence to form the polycyclic core structure. This new strategy was employed in the total synthesis of natural product (+)-aspidospermidine.     

Simultaneous spectrofluorimetric determination of the rare earths with calcein

The reactivity of the fluorescent reagent calcein with the trivalent cations of the rare earths has been spectrofluorimetrically studied in aqueous solution. Optimum excitation and emission wavelengths were 492-497 and 519-522 nm, respectively. Optimum pH was in the range 6.0-9.2. The stoichiometry of the complexes was 1:1. A direct, rapid and sensitive method for the determination of rare earth mixtures has been proposed with a detection limit of 4.49x10(-8) M and a coefficient of variation of 0.82%.